Price: $9799.99
Please email us for more information and bank wiring instructions.
 
Speed Density Motorsport presents a VW VR6 R32/Audi TT 3.2 race/street engine. This is a low compression 8.5:1 engine. Suite able for boost from a supercharger or turbocharger and up to 800hp. This package features a 3.2 VW block and crank. Fully documented and blue printed engine including all clearances.
 
This means you will get the a sheet will all the assembly measurements and clearances. MK4 (ONLY) Techtonic 264/260camshafts, Super tech valve springs, supertech valves,  all new timing components. JE forged pistons , H beam forged rods, upgraded .240" wall CP pins, OEM VW rods and main bearings. Schimmel tool steel head studs, OEM VW MLS head gasket, ARP main studs. Capable of 35 psi, 800+hp. 1 year, unlimited mileage warranty.
 
Highly recomended!! We are now offering solid locking pin service for the crankshaft pulley as well as the flywheel. The front pulley and flywheel bolts have been known to vibrate and back off at high RPMs causing damage to flywheel and pulley on the VR6 engines.  This service involves CNC machining the flywheel, front pulley and crankshaft. If you would like to add this service, you will be required to ship in your flywheel and or front pulley to us for us to machine while we are preparing assemble for your engine.  PINNING SERVICE AS FOLLOWS
CRANKSAHFT TO FLYWHEEL = $375
CRANKSHAFT TO FRONT PULLEY =$375_
 
Warranty covers the internals of the engine, however we are not responsible for issues with tuning and or low, poor maintenance and or insufficient engine oil, or damage to cranksahft due engine build WITHOUT Solid Locking Pin service.
 
Includes complete assembled long block.
The following are not included:
-Oil pan
-Valve cover
-Engine sensors
-Oil filter housing
-Intake manifold
-Exhaust manifold
-Accessory brackets, I.E. alternator/compressor
-Water pump, thermostat or water pipe
 
AFTER PURCHASE PLEASE CONTACT US WITH YOUR ENGINE CODE.
 
We require a deposit of $6000 to start the project. The down payment covers most of the parts to start the process. The complete price of the engine package is $10299. Remaining due when completed. 
 
Please contact us for additional options!

-Fluid Dampr Balancer with friction washer $525 (highly recommended!)
-Injector Dynamics injectors 1050X, 1350X, 1700X or 2600XDS ( great injector for the money)
-Precision 6262 Ball Bearing Turbocharger
-Custom tubular manifold per chassis
-Our SDM Billet intake manifold
-Our SDM 3.2L Billet valve cover
 
Please allow 2-3 months for assembly time. After complete, please we will arrange freight shipping or pick up options.
 
No core is required, we supply a good engine to start the 800hp build. We will collect the freight cost when the engine is completed.
 
Please email us for more information and bank wiring instructions.